doohicky for my thingamabobs
Thread Starter
|
Elder User
Joined: Sep 2015
Posts: 794
Likes: 19
From: between lost and found
doohicky for my thingamabobs
Is there a specialty tool for removing the pin connectors in the horseshoe connectors?
I am planning on replacing the turn signal switch in my column, and have been searching the threads for ideas on "how to", but I must not be using the correct key words.
Thanks
Tom
I am planning on replacing the turn signal switch in my column, and have been searching the threads for ideas on "how to", but I must not be using the correct key words.
Thanks
Tom
FTE Emeritus
Joined: Jan 2006
Posts: 2,288
Likes: 200
From: springfield Missouri area
Lisle 56500 - Wire Terminal Tool | O'Reilly Auto Parts
Mountain Pass
Joined: Nov 2013
Posts: 243
Likes: 10
I don't recall needing a thinkamajig to get the pins out.
Here is my write up when I changed mine.
https://www.ford-trucks.com/forums/1...highlight=turn
When you do a search on this forum use quotes "" to reduce the number of hits you get. So do a search for "turn signal" or "signal switch"
Hope that helps.
Ohh. You might want to make sure to disconnect your battery. I wound up blowing a fuse and not realizing it.
There are several good youtube videos of mustangs that are pretty similar to our trucks.
Here is my write up when I changed mine.
https://www.ford-trucks.com/forums/1...highlight=turn
When you do a search on this forum use quotes "" to reduce the number of hits you get. So do a search for "turn signal" or "signal switch"
Hope that helps.
Ohh. You might want to make sure to disconnect your battery. I wound up blowing a fuse and not realizing it.
There are several good youtube videos of mustangs that are pretty similar to our trucks.
Thread
Thread Starter
Forum
Replies
Last Post
dave47111
1987 - 1996 F150 & Larger F-Series Trucks
3
Jan 28, 2011 02:21 PM
