Keyless entry/doorpad question
Thread Starter
|
Senior User
Joined: Sep 2012
Posts: 257
Likes: 0
Keyless entry/doorpad question
Just got an 04 Navigator, and been trying to figure everything out with it.. one place I'm lost is on the door number pad.
I found the factory 5 digit code on the module in the passenger footwell, but it doesnt seem to work.
I can lock all doors from the keypad, and the remote works fine.. just no unlock from the keypad..
Not all numbers light up but the 7/8 and 9/0 are among those that don't and thats how it locks..
Any ideas?
Related, is there any way to get auto unlock when you turn it off? I keep getting around to the back door to get my son out of his car seat and finding the doors locked. On my other cars all door unlock together.
I found the factory 5 digit code on the module in the passenger footwell, but it doesnt seem to work.
I can lock all doors from the keypad, and the remote works fine.. just no unlock from the keypad..
Not all numbers light up but the 7/8 and 9/0 are among those that don't and thats how it locks..
Any ideas?
Related, is there any way to get auto unlock when you turn it off? I keep getting around to the back door to get my son out of his car seat and finding the doors locked. On my other cars all door unlock together.
Thread Starter
|
Senior User
Joined: Sep 2012
Posts: 257
Likes: 0
That's what I expected; how did you get it apart?
Fleet Owner
Joined: Apr 2008
Posts: 24,323
Likes: 5,132
From: 0,0,1
You have to take the interior door panel off and reach in to remove a nut or two plus a wire connector if I recall correctly. Once it's out of the door and in your hand the rest become obvious.
Thread
Thread Starter
Forum
Replies
Last Post
bigtexan99
1999 - 2003 7.3L Power Stroke Diesel
4
Jan 31, 2010 01:31 AM
