When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My 1980 F 100 has no heat stove. The 300 -6 cyl. engine that was in the truck when I bought it many years ago was a rebuild so I assume that part never made it back on. Can anyone supply me with a clear picture of what this looks like? Are these still available somewhere? I haven't come across any in the junkyards around here and I'm sure they would be rusted out if I did. I operate the truck from May to October right now but I'm hopping to restore the engine to winter operating conditions. Any help is appreciated.
These are hard to come by in junk yards. I have seen some available in the past, but they are expensive. I have seen people take a pipe and attach it to the side of one header with hose clamps with success. Not pretty, but operational Not sure on diameter for the flex hose that leads to the air filter snorkel right now.
This shroud also requires its support bracket. See 9C670 in parts catalog pic.
D9TZ-9A603-B .. Carburetor Air Cleaner Air Duct Shroud-Use with dry type (paper filter) air cleaner / Obsolete
1979 F100/350 & Econoline 300 I-6 from serial number DE0,001 / 1980 F100/350, Bronco & Econoline 300 I-6 / 1981/83 Econoline 300 I-6.
NOS PARTS SOURCE in Olathe KS has 1 = 913-220-5746.
----------------------------------------------------------------- D3AZ-9C670-B (replaced C8AZ-9C670-B & C) .. Carburetor Air Shroud Support Bracket / Obsolete
GREEN SALES CO. in Cincinnati OH has 158 = 800-543-4959.
--------------------------------------------------------------------- E3TZ-9652-A (replaced C9UZ-9652-A) .. Carburetor Air Cleaner Hot Air Tube - paper & aluminum composite - 2.00" diameter x 18.00" long-cut to fit / Obsolete ~ Available NOS & gazillions of auto parts stores.
My 1980 F 100 has no heat stove. The 300 -6 cyl. engine that was in the truck when I bought it many years ago was a rebuild so I assume that part never made it back on. Can anyone supply me with a clear picture of what this looks like? Are these still available somewhere? I haven't come across any in the junkyards around here and I'm sure they would be rusted out if I did. I operate the truck from May to October right now but I'm hopping to restore the engine to winter operating conditions. Any help is appreciated.
If you haven't found one, I'll give you one. Send me a PM and we'll make arrangements.
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.
