custom steering questions
Thread Starter
|
Freshman User
Joined: Apr 2015
Posts: 32
Likes: 0
custom steering questions
has anyone done a custom steering system on a d44 with hiems and tube? i imagine someone on here has. my ball joints are worn and need replacing. should i just spend the money to drill out the knuckles and run heims?
Cargo Master
Joined: May 2009
Posts: 2,587
Likes: 47
From: Eagle River, AK
I am assuming you mean tie rod ends, not ball joints. That or I miss-understood what you were saying.
I have heard of people using the larger GM 1-Ton Tie Rod Ends and DOM Tubing, but never heim joints.
Here's a little reading on the subject.
Steering You Straight - Heim-Joints vs. Tie-Rod Ends - 4-Wheel & Off-Road Magazine
I have heard of people using the larger GM 1-Ton Tie Rod Ends and DOM Tubing, but never heim joints.
Here's a little reading on the subject.
Steering You Straight - Heim-Joints vs. Tie-Rod Ends - 4-Wheel & Off-Road Magazine
Thread
Thread Starter
Forum
Replies
Last Post
TexasGuy001
1987 - 1996 F150 & Larger F-Series Trucks
1
May 1, 2007 01:00 PM
