Headligt switch?
Moderator
Joined: Jan 2004
Posts: 13,851
Likes: 111
From: SW Va
Hey, you aren't alone, spent half an hour today trying to figure out why my chainsaw wouldn't start, I finally realized while cranking it I'd hit the ignition switch & turned it off!!!! lol
Also, on the Fogs, with the ignition in the Run position, the headlights must be on Low beam for the Fog lights to work. Even if the Fog switch is activated, we must have the Low beam head lights on, for them to get power. If the Fogs are on with the low beams, they'll turn off when we go to High beam.
Also, on the Fogs, with the ignition in the Run position, the headlights must be on Low beam for the Fog lights to work. Even if the Fog switch is activated, we must have the Low beam head lights on, for them to get power. If the Fogs are on with the low beams, they'll turn off when we go to High beam.
Thread
Thread Starter
Forum
Replies
Last Post
