AC Compressor mounting Bolt size?
Thread Starter
|
Senior User
Joined: Aug 2014
Posts: 185
Likes: 0
From: Olanta, PA
AC Compressor mounting Bolt size?
Quick question... I have an 87 F150 2WD I300 6, When I got it it was missing the Compressor, (which I have since replaced) BUT I need to get the 4 bolts that mount it to the engine. I have loooked around a bit but don't see anything anywhere, (at least not that I am sure of). Does anyone know the size of these bolts? (length, Thread) Any help would be appreciated.
FTE Chapter Leader
Joined: May 2006
Posts: 12,338
Likes: 1,314
From: Central Mississippi
Have mine out right now of my 94 5.8, no idea if the same, but...
7MM flange head bolt, 1.25 pitch. 10MM head, 120MM overall under head (Smidge over 4-3/4 inch) Looks like about 22mm thread engagement.
JY be easier than trying to source it. If you could find metric all-thread it might be doable.
Good luck.
7MM flange head bolt, 1.25 pitch. 10MM head, 120MM overall under head (Smidge over 4-3/4 inch) Looks like about 22mm thread engagement.
JY be easier than trying to source it. If you could find metric all-thread it might be doable.
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
