passenger Window hanging up
Thread Starter
|
Freshman User
Joined: Jun 2014
Posts: 25
Likes: 0
passenger Window hanging up
I replaced all glass and cleaned up guts in passenger door, window regulator and door latches.
When I try and roll down/up the passenger window it seems to be hitting the door latch mechanism. I remember that the passenger door latch had a funny bend in the linkage, but I had seen other pictures of this bend. I assumed it was to eliminate the door handle from being flipped up and locked? Is this right or is something wrong? Other than I have to move things inside the door to get the window up/down.
Thanks eric
When I try and roll down/up the passenger window it seems to be hitting the door latch mechanism. I remember that the passenger door latch had a funny bend in the linkage, but I had seen other pictures of this bend. I assumed it was to eliminate the door handle from being flipped up and locked? Is this right or is something wrong? Other than I have to move things inside the door to get the window up/down.
Thanks eric
Thread Starter
|
Freshman User
Joined: Jun 2014
Posts: 25
Likes: 0
My own question
I looked again on web photos and don't see other passenger sides latch linkage bent as bad as mine. Might have answered own question. take apart again and straighten (hopefully it has a bad kink?)
Thread
Thread Starter
Forum
Replies
Last Post
