When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well I had a pretty ambitious list of work I wanted to accomplish on the truck this winter. Well you guessed it Ive gotten nothing done. The wife and I found out that we are expecting our first child so my free time has been consumed with a home remodel.
So the short list, which Im going to try and get done now is:
Re-O ring my injectors
Send the FICM to Ed for a general check up and Atlas 40
Remove the analog gauges and get my Edge CTS installed w/ Camera in the bed pointed at my GN hitch
Maybe if all goes well install my EGR cooler delete kit and replace the oil cooler.
If anyone is interested in my A-pillar gauges and Dash Daq LMK. I will give you guys first shot before I put it in the classifieds.
I will post pictures of the gauges here in a few days. They are Trans temp, pyro, and boost. The Dash Daq will monitor anything that can be seen through the OBD 2 port. I purchased it with the Ford bundle so I can see most PIDS.
Congrats on the new addition to the fam. We have Ben remodeling for 3 years now. I have moved the laundry room twice soon to be a third and hopefully final time. Moved the kitchen. Added a room out back. It never ends.
Congrats on the baby. We have lived here since 1978 and I'm still remodeling. It's like painting the Brooklin Bridge. By the time you get done it's time to start at square 1 again.