Check engine light and abs light
Thread Starter
|
New User
Joined: Mar 2010
Posts: 12
Likes: 0
Check engine light and abs light
Both came on tonight .... Looks like first unscheduled trip to the dealer 2012 4x4 cab chassis 30,000miles. On a side note my new plow hydraulics screwed up on tonight too with 30 inches expected in next 24 to36 hours.
Super Moderator
Joined: Aug 2008
Posts: 37,384
Likes: 1,868
From: Frederick, MD
hard to say what the issue might be without reading the codes.
Check engine lights are usually emissions related.
The wrench symbol is usually powertrain related. Both could be on at the same time.
My guess would be EGR related.
The abs might just be a dirty sensor. You might rinse the wheels down and see if it goes away.
Check engine lights are usually emissions related.
The wrench symbol is usually powertrain related. Both could be on at the same time.
My guess would be EGR related.
The abs might just be a dirty sensor. You might rinse the wheels down and see if it goes away.
Thread Starter
|
New User
Joined: Mar 2010
Posts: 12
Likes: 0
hard to say what the issue might be without reading the codes.
Check engine lights are usually emissions related.
The wrench symbol is usually powertrain related. Both could be on at the same time.
My guess would be EGR related.
The abs might just be a dirty sensor. You might rinse the wheels down and see if it goes away.
Check engine lights are usually emissions related.
The wrench symbol is usually powertrain related. Both could be on at the same time.
My guess would be EGR related.
The abs might just be a dirty sensor. You might rinse the wheels down and see if it goes away.
Thread
Thread Starter
Forum
Replies
Last Post
