Cowl Vent Install (tutorial)
Cross-Country
Joined: Oct 2006
Posts: 70
Likes: 3
Just so that you're prepared, the 4 screws holding the vent cover to the lift assembly will likely be a hex head...bring a small wrench. Slotted or philips head screws are very likely be installed because even a stubby screwdriver can't be used when the vent has been fully opened.
FTE Legend
Joined: Oct 2005
Posts: 283,811
Likes: 8,326
From: northwestern Ontario
Just so that you're prepared, the 4 screws holding the vent cover to the lift assembly will likely be a hex head...bring a small wrench. Slotted or philips head screws are very likely be installed because even a stubby screwdriver can't be used when the vent has been fully opened.
......
Thread
Thread Starter
Forum
Replies
Last Post
sere0501
1948 - 1956 F1, F100 & Larger F-Series Trucks
18
Apr 23, 2017 07:45 PM
A/Ox4
1999 - 2016 Super Duty
17
Nov 25, 2011 11:08 AM
