Is there a writeup or something that will explain what to remove and its locations for the computer, non needed wiring, vac lines, etc after swapping ignitions on a feedback 300/6?

 

Have you looked in the places where the write-ups are stored?

 

Yeah i scrolled through the how to and faq. Didnt see anything titled that fit the topic.

 

The information is out there, but not necessarily in a hold-your-hand walk-through.

I'd begin researching in the DS2 conversions from the Sticky:

Ignition and EEC (Electronic Engine Control)
<hr style="color:#D1D1E1; background-color:#D1D1E1" size="1"> DSII DS-II DS2 DuraSpark II CONVERSIONS (SWAPS)
https://www.ford-trucks.com/forums/10...on-how-to.html
https://www.ford-trucks.com/forums/96...-86-i-6-a.html
https://www.ford-trucks.com/forums/10...g-harness.html

 

I found that there wasn't any pictures when I did my swap and that really sucked. There's a bronco forum that helped me more honestly
I also didn't go to Ds 2