2015 BS thread. Bring it!
Hotshot
Joined: Jul 2002
Posts: 18,307
Likes: 9,068
From: Sheridan / Gilchrist
Good morning Oregon and everyone everywhere else. 41.9°, a few clouds but mostly clear at the moment. A 50 percent chance of showers. Mostly cloudy, with a high near 56. West wind 6 to 9 mph. 
Think the Warden has a Costco trip in mind for today. I need to go to the BLM regional office today and want to stop by the Warn Dealer as well.
Think the Warden has a Costco trip in mind for today. I need to go to the BLM regional office today and want to stop by the Warn Dealer as well.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Hotshot
Joined: Jul 2002
Posts: 18,307
Likes: 9,068
From: Sheridan / Gilchrist
No, did those last year.
One of the assembly bolts for the Brush guard has apparently corroded off and I need to see what I need to do to get a replacement and how I even replace it without tearing the hole thing apart, which if that is the case, I may just take it out to the farm and weld it.
Last fall when winching a elk up a hill we noticed that the clutch on the winch would chatter every once in awhile so I thought I would talk to them about that as well.
One of the assembly bolts for the Brush guard has apparently corroded off and I need to see what I need to do to get a replacement and how I even replace it without tearing the hole thing apart, which if that is the case, I may just take it out to the farm and weld it.
Last fall when winching a elk up a hill we noticed that the clutch on the winch would chatter every once in awhile so I thought I would talk to them about that as well.
Hotshot
Joined: Jul 2002
Posts: 18,307
Likes: 9,068
From: Sheridan / Gilchrist
I got my set of Warn "Premium" hubs through O'Reilly Auto Parts. Just a little cheaper and I got a Military Discount at O'Reilly's.
http://www.warn.com/where-to-buy.shtml
Hotshot
Joined: Jul 2002
Posts: 18,307
Likes: 9,068
From: Sheridan / Gilchrist
Went with premium because they weren't that much more and when my OEM Auto Hubs snapped (drivers side), a Toyota Pickup had to pull me off of the grass/mud log landing and onto the gravel road.
First I made sure no one was taking any pictures of that,
Second I swore that was never, ever going to happen again.
(my elk hunting partner has never let me forget it either!)
