When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here is the New Iron Horse Edition. I can leave the "Edition" on or take it off.
It looks like to me that the driver and passenger side should be switched around. Unless it doesn't matter if held on with double sided tape and cover existing holes.
It looks like to me that the driver and passenger side should be switched around. Unless it doesn't matter if held on with double sided tape and cover existing holes.
If you get them, you can stick them where you will, but they are meant to be having the horse pulling into the wind.
I could get in on #6, and possibly on #10 but not 100% sure. Honestly those 2 would look right at home on mine, the rest I'm not going to vote on as I'm not going to be in on the buy unless it's one of those 2.
Just a heads up guys, we can't have a "Front" and "Back" one to make it a bulk buy. We can have 2 group buys, one for the front and one for the rear and then we just buy the rears separately but they will not count towards the fronts if they are different in any way.
Just a heads up guys, we can't have a "Front" and "Back" one to make it a bulk buy. We can have 2 group buys, one for the front and one for the rear and then we just buy the rears separately but they will not count towards the fronts if they are different in any way.
So about the group buy, I had made most of the logos as a right side and a left side, with the right side also the one to be use on the back.
Do you know if they would do "sets" of badges as a group buy? That would mean three badges per set...