tool source please!
Thread Starter
|
Tuned
Joined: Oct 2001
Posts: 328
Likes: 4
tool source please!
I'm looking for a hydraulic lifter bleed down tool that will work on a 390.
There's a procedure for measuring valve lash that calls for this tool.
Any ideas, or have you ever heard of such a tool?
Thanks
There's a procedure for measuring valve lash that calls for this tool.
Any ideas, or have you ever heard of such a tool?
Thanks
Post Fiend
Joined: Apr 2002
Posts: 19,311
Likes: 97
From: Waterloo, Iowa
Never heard of that, that's not saying much tho.. lol There was a common tool for that called the "P&G valve gapper" that was used for lots of different engines, but only solid lifters. Maybe they made an updated type for hyd. lifters.
Fleet Owner
Joined: Aug 2010
Posts: 21,253
Likes: 1,656
From: Reynoldsburg, Ohio
If you had a Rotunda part number head to eBay and look around. There are quite a few sellers who have a ton of barely or gently used Rotunda tools taken from dealerships that were disposing of older tools or closed down altogether.
Thread
Thread Starter
Forum
Replies
Last Post
theGman
1948 - 1956 F1, F100 & Larger F-Series Trucks
64
Dec 28, 2007 09:02 PM
90f150moneypit
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
0
Aug 13, 2003 08:48 PM
