Notices
6.0L Power Stroke Diesel 2003 - 2007 F250, F350 pickup and F350+ Cab Chassis, 2003 - 2005 Excursion and 2003 - 2009 van

Wrench light while towing

Thread Tools
 
Search this Thread
 
Old Aug 5, 2014 | 04:18 PM
  #1  
johnblade's Avatar
johnblade
Thread Starter
|
Junior User
Joined: Jan 2008
Posts: 66
Likes: 0
Wrench light while towing

I was pulling my trailer up a fairly long hill, watching the ect got up around 210 and heard the fan come on. The eot was around 225 and I lost all boost threw the wrench light. Without the trailer in the summer the temps are around eot 200 ect 190.Wondering if the oil cooler is plugging up? 2007 6.0
 
Reply
Old Aug 5, 2014 | 05:06 PM
  #2  
Misky6.0's Avatar
Misky6.0
Lead Driver
15 Year Member
Liked
Loved
Community Favorite
Joined: Oct 2010
Posts: 5,420
Likes: 16
From: Ouray, CO
The 15* delta probably set the CEL (since you have a 2007), but during towing the delta varies widely based on grade, wind, outdoor temp, etc.. so it's not a real way to determine IF your oil cooler is clogged.

The typical method is with engine up to temp (190) and to drive 65-ish on reasonable FLAT (NOT towing) interstate for 15 minutes or so watching the temps..
 
Reply
Old Aug 5, 2014 | 05:15 PM
  #3  
Bullitt390's Avatar
Bullitt390
Certified Thread Hijacker
20 Year Member
Photogenic
Liked
Joined: Aug 2001
Posts: 14,441
Likes: 59
Club FTE Silver Member

The standard for an oil cooler wrench light is more or less 25 degrees.

Need to pull codes as it could be FICM voltage or a boost issue too.

Josh
 
Reply
Old Aug 5, 2014 | 05:16 PM
  #4  
69cj's Avatar
69cj
Hotshot
20 Year Member
Photogenic
Joined: Jul 2005
Posts: 13,834
Likes: 25
From: Middle Tn.
Bet you a 12 pack it's your turbo. Classic towing an incline, wrench light and limp mode. Pull over, turn engine off, restart and it's like nothing had happened.
 
Reply
Old Aug 5, 2014 | 05:39 PM
  #5  
9228.bobcat's Avatar
9228.bobcat
Cargo Master
Joined: Oct 2009
Posts: 2,283
Likes: 0
From: missouri
Originally Posted by 69cj
Bet you a 12 pack it's your turbo. Classic towing an incline, wrench light and limp mode. Pull over, turn engine off, restart and it's like nothing had happened.
I would agree. Pull codes and I bet there will be an over boost code. Probably time to clean it if that's the case.
 
Reply
Old Aug 5, 2014 | 06:12 PM
  #6  
MC5C's Avatar
MC5C
Posting Guru
Joined: Jun 2012
Posts: 1,171
Likes: 2
It won't set a code if the wrench light comes on, just happened to me. Probably stuck turbo vanes.

Brian
 
Reply
Old Aug 5, 2014 | 06:20 PM
  #7  
9228.bobcat's Avatar
9228.bobcat
Cargo Master
Joined: Oct 2009
Posts: 2,283
Likes: 0
From: missouri
Should still be a code. Need a good reader to pull it.
 
Reply
Old Aug 5, 2014 | 06:21 PM
  #8  
Bullitt390's Avatar
Bullitt390
Certified Thread Hijacker
20 Year Member
Photogenic
Liked
Joined: Aug 2001
Posts: 14,441
Likes: 59
Club FTE Silver Member

Originally Posted by MC5C
It won't set a code if the wrench light comes on, just happened to me. Probably stuck turbo vanes.

Brian
The wrench light is supposed to set unique codes for the issue. Likely need a very high quality scanner, AE or IDS to get it.

Scangauge definitely won't pull those codes.

Josh
 
Reply
FTE Stories

Ford Trucks for Ford Truck Enthusiasts

story-0

Top 10 Ford Truck Tragedies

 Joe Kucinski
story-1

AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make

 Brett Foote
story-2

Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!

 Michael S. Palmer
story-3

Ford's 2001 Explorer Sportsman Concept Looks For a New Home

 Verdad Gallardo
story-4

10 Best Ford Truck Engines We Miss the Most!

 Joe Kucinski
story-5

2026 Shelby F-150 Off-Road: Better Than a Raptor R?

 Brett Foote
story-6

2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!

 Michael S. Palmer
story-7

10 Most Surprising 2026 Ford Truck Features!

 Joe Kucinski
story-8

Top 10 Ford Trucks Coming to Mecum Indy 2026

 Brett Foote
story-9

5 Best / 5 Worst Ford Truck Wheels of All Time

 Joe Kucinski
Old Aug 5, 2014 | 07:54 PM
  #9  
johnblade's Avatar
johnblade
Thread Starter
|
Junior User
Joined: Jan 2008
Posts: 66
Likes: 0
Thanks for the input guys,I will get the code read nothing on the scan gauge . Just for info why does the turbo seem to work good without towing?
 
Reply
Old Aug 5, 2014 | 08:10 PM
  #10  
9228.bobcat's Avatar
9228.bobcat
Cargo Master
Joined: Oct 2009
Posts: 2,283
Likes: 0
From: missouri
Putting a load on it makes the turbo work harder. If there is some coking or rust on the unison ring or veins would be more likely to stick open and cause an overboost. I am sure if you were unloaded and wot up a hill would probably do the same thing.
 
Reply
Old Aug 5, 2014 | 08:14 PM
  #11  
Shaneb75's Avatar
Shaneb75
Strokin Okie
20 Year Member
Liked
Loved
Joined: Apr 2004
Posts: 1,883
Likes: 21
From: Oklahoma
Club FTE Silver Member

I agree, had the same experience. My truck had a P0299 code along with the wrench light...
 
Reply
Old Sep 26, 2014 | 10:44 AM
  #12  
Grannygear's Avatar
Grannygear
Cross-Country
Joined: Jun 2004
Posts: 51
Likes: 2
I have had the same problem. Typically it occurs towing my car hauler with the cruise control on and I forget to turn off CC as I start up a grade. The tranny downshifts at least 2 gears increasing the revs and then the wrench light comes on.
 
Reply
Old Sep 26, 2014 | 01:34 PM
  #13  
MC5C's Avatar
MC5C
Posting Guru
Joined: Jun 2012
Posts: 1,171
Likes: 2
Randy, you're almost certainly going to need to pull the turbo and see if it just needs cleaning or needs a new turbo. You should have been able to see the boost going high fast just after it down-shifted, it will de-fuel and set the wrench light at around 32 lbs of boost, or so they say.

Brian
 
Reply
Old Sep 26, 2014 | 08:23 PM
  #14  
Grannygear's Avatar
Grannygear
Cross-Country
Joined: Jun 2004
Posts: 51
Likes: 2
Brian - Thanks for your response. Hope it just needs cleaning. A new turbo sounds expensive.
 
Reply
Old Sep 27, 2014 | 06:49 AM
  #15  
MC5C's Avatar
MC5C
Posting Guru
Joined: Jun 2012
Posts: 1,171
Likes: 2
You can see from my sig line that I put in a new Rotomaster turbo. My OEM turbo was heavily corroded, the Rotomaster was $995, brand new, made in Canada, no core charge.

Brian
 
Reply



All times are GMT -5. The time now is 05:11 AM.

story-0
Top 10 Ford Truck Tragedies

Slideshow: Top 10 Ford truck tragedies.

By Joe Kucinski | 2026-05-18 19:34:33


VIEW MORE
story-1
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make

And it might be even better than that.

By Brett Foote | 2026-05-18 19:26:42


VIEW MORE
story-2
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!

Slideshow: Does lowering an F-150 Lobo RUIN the ride quality?

By Michael S. Palmer | 2026-05-18 19:20:37


VIEW MORE
story-3
Ford's 2001 Explorer Sportsman Concept Looks For a New Home

Slideshow: Ford's bizarre fishing-themed Explorer concept has resurfaced after spending decades largely forgotten.

By Verdad Gallardo | 2026-05-12 18:07:46


VIEW MORE
story-4
10 Best Ford Truck Engines We Miss the Most!

Slideshow: The 10 best Ford truck engines we miss the most.

By Joe Kucinski | 2026-05-12 13:09:47


VIEW MORE
story-5
2026 Shelby F-150 Off-Road: Better Than a Raptor R?

Slideshow: first look at the 810 hp 2026 Shelby F-150 Off-Road!

By Brett Foote | 2026-05-12 12:50:07


VIEW MORE
story-6
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!

Slideshow: Everything You Need to Know about the 2027 Super Duty Carhartt Package!

By Michael S. Palmer | 2026-05-07 17:51:06


VIEW MORE
story-7
10 Most Surprising 2026 Ford Truck Features!

Slideshow: 10 most surprising Ford truck options/features in 2026.

By Joe Kucinski | 2026-05-05 11:17:22


VIEW MORE
story-8
Top 10 Ford Trucks Coming to Mecum Indy 2026

Slideshow: Here are the top 10 Fords coming to Mecum Indy 2026.

By Brett Foote | 2026-05-04 13:49:49


VIEW MORE
story-9
5 Best / 5 Worst Ford Truck Wheels of All Time

Slideshow: The 5 best and 5 worst Ford truck wheels of all time

By Joe Kucinski | 2026-04-29 16:49:01


VIEW MORE