212 code only and stalling
Fleet Owner
Joined: Aug 2005
Posts: 23,667
Likes: 301
From: Easton,Ks
OK ICM.
The voltages in the diagram below would be the same for the 1996 except the pin numbers at the PCM would be different if you have OBD-II:
/
The voltages in the diagram below would be the same for the 1996 except the pin numbers at the PCM would be different if you have OBD-II:
/
Thread Starter
|
Junior User
Joined: Nov 2013
Posts: 64
Likes: 0
So I checked the icm at the top wire and had no pip signal then checked to see if was getting battery voltage to icm, I was so I ripped out the icm module and brought it to autozone ( 2 different ones neither had the correct adaptor to test) I called around and finally found one 15 miles away they said they never had one fail as bad as this one did I bought one from them knowing the issues the after market ones have I still ordered a motorcraft one from the parts house. Truck is now running smoothly and needed to readjust the timing as it was to far advanced.
Thread
Thread Starter
Forum
Replies
Last Post
Da_Lariat_Chariot
1987 - 1996 F150 & Larger F-Series Trucks
19
Oct 29, 2017 08:56 PM
