Oil Pan Identification
Thread Starter
|
Freshman User
Joined: Oct 2013
Posts: 49
Likes: 0
Oil Pan Identification
Im cleaning and replacing some old parts on my 78 F100 W/302 and having problems replacing oil pan parts. This pan is what came on my 302 but doesn't match up to what is supposed to be on this engine. It has the dipstick that comes out of the oil pan which according to my research is for Broncos and E150's not f100's ? the oil pickup tube is also a mismatch to what is supposed to be on it. What do you guys think ? Im thinking of ordering a threaded tube from Broncograveyard and cleaning the pickup tube and just put on a new gasket and call it a day.
Thread Starter
|
Freshman User
Joined: Oct 2013
Posts: 49
Likes: 0
Thats interesting because Bronco Graveyard sells the screw in type for 302's and 351's, 400's so I ordered one to replace mine that I cut off because it was leaking and had a hole worn in the tube.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 790
From: Simi Valley, CA
You didn't say whether your dipstick tube is the push in or screw in type, and I cannot tell what it is from the pic you posted.
If you had said your dipstick tube is the screw in type, I would have given you additional info.
Thread
Thread Starter
Forum
Replies
Last Post
pinegreen
1966 - 1977 Early Broncos
1
Dec 2, 2000 11:21 AM
