Cert label reprint ideas?
Thread Starter
|
Junior User
Joined: Jun 2012
Posts: 89
Likes: 0
From: Vancouver, WA
Cert label reprint ideas?
Greetings, I was reading somewhere that someone was able to get a certification label reprinted. I have our original label and have changed cabs. Does anyone know where or how to get a new cert label to put on the B pillar of the new cab?
Thanks
Ken
Thanks
Ken
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
Reproduced Safety Standard Certification Labels & Warranty Plates: martiauto.com / Marti located in El Mirage, NW of Phoenix AZ
Marti will need the VIN to print the correct info on the Certification Label or stamp the VIN and codes on the Warranty Plate.
Certification Label glued to the B pillar below the striker plate. Warranty Plate riveted to the left door face below the latch.
In the late 1980's, Kevin Marti...a Mustang/Shelby nut, acquired all the original 1967/79 FoMoCo records, after he found out that FoMoCo was planning to THROW THEM AWAY!
Marti can also provide a copy of the original build sheet and all sorts of other info. There is a fee for this info...which escalates, depending on how much info you want.
Marti will need the VIN to print the correct info on the Certification Label or stamp the VIN and codes on the Warranty Plate.
Certification Label glued to the B pillar below the striker plate. Warranty Plate riveted to the left door face below the latch.
In the late 1980's, Kevin Marti...a Mustang/Shelby nut, acquired all the original 1967/79 FoMoCo records, after he found out that FoMoCo was planning to THROW THEM AWAY!
Marti can also provide a copy of the original build sheet and all sorts of other info. There is a fee for this info...which escalates, depending on how much info you want.
Hotshot
Joined: Apr 2009
Posts: 14,333
Likes: 247
From: Stanley, VA
Thread
Thread Starter
Forum
Replies
Last Post
Niwrek
1973 - 1979 F-100 & Larger F-Series Trucks
8
Sep 24, 2023 05:53 PM
apachetech
1973 - 1979 F-100 & Larger F-Series Trucks
7
Jul 17, 2015 01:19 PM
