Drain Plug
Fleet Owner
Joined: Nov 2003
Posts: 27,901
Likes: 3,617
You do not take the plate off, unless you think it has been damaged somehow.
Lead Driver
Joined: Sep 2003
Posts: 5,241
Likes: 3
From: Other side of the sunrise
I'm pretty sure that Yahiko's post was stating the opposite, that it is not a sacrificial anode for corrosion as the originals are simply steel. I believe the purpose of the brass replacement plug is so the brass threads would strip if overtightened or cross threaded rather than the HFCM, since brass is softer than the HFCM. Though the replacement (brass) plugs are only needed to be finger tightened, I think that would be the purpose of using brass.
Fleet Owner
Joined: Apr 2012
Posts: 27,307
Likes: 549
From: Spanaway
Diesel is not really a conductive fluid and there for would not need
to have a sacrificial anode at all. It more that the byproducts of the
algue are chemical corrosive.
Brass is less reactive with aluminum than steel. I used to have a
chart that showed what metals reacted with each other.
Sean
to have a sacrificial anode at all. It more that the byproducts of the
algue are chemical corrosive.
Brass is less reactive with aluminum than steel. I used to have a
chart that showed what metals reacted with each other.
Sean
Thread
Thread Starter
Forum
Replies
Last Post
BII Plow Truck
2017 - 2022 Super Duty
1
Oct 26, 2017 07:14 PM
yomamaha
Clutch, Transmission, Differential, Axle & Transfer Case
1
Jul 14, 2003 11:43 PM
