stand pipe

Reply Subscribe

Thread Tools

Search this Thread

Feb 24, 2014 | 08:48 AM

96_F250_Deezal

Thread Starter

More Turbo

Joined: Jun 2011

Posts: 634

Likes: 21

From: Indiana

stand pipe

replacing Injectors on my truck. I have the passenger side valve cover off with the oil rail removed and new injectors are installed. My engine already has the updated Stand pipe, but the o-rings look flat and worn. can I get new O-rings? or should I just replace the pipe?

Feb 24, 2014 | 07:46 PM

96_F250_Deezal

Thread Starter

More Turbo

Joined: Jun 2011

Posts: 634

Likes: 21

From: Indiana

107 views and no response? pretty simple question, I thought.

Guess I will just lube the hell out to the o-rings and put it together.

Feb 24, 2014 | 08:19 PM

9228.bobcat

Cargo Master

Joined: Oct 2009

Posts: 2,283

Likes: 0

From: missouri

You can get o rings for them. Not sure if they sell them individually or not. But they do sell them. I would replace o rings if they look funny.

Feb 24, 2014 | 08:26 PM

CPB1

Fleet Mechanic

Joined: Aug 2012

Posts: 1,760

Likes: 21

Replace the O-rings if you can get them. If not, Ford sells the stand pipes and dummy plugs as a kit. The updated stand pipes have a white nylon washer in addition to the O-ring.

The stand pipes also come with the Ford head gaskets.

.

Feb 24, 2014 | 09:09 PM

VQT

Posting Guru

Joined: Oct 2011

Posts: 1,076

Likes: 1

From: Las Vegas, Nevada

Are you replacing all injectors at $220 a piece from AutoNation/Tousely Ford? Since the stand pipe from them is about $41/each why not just replace them too for piece of mind.

Feb 25, 2014 | 08:45 AM

96_F250_Deezal

Thread Starter

More Turbo

Joined: Jun 2011

Posts: 634

Likes: 21

From: Indiana

No... I replaced #1 injector that was setting codes for a failed coil. I installed new seals and polished the spool valves on the other 3 injectors. as I mentioned before, updated design stand pipe already installed, the O-rings appears to be in usable condition, I will lube them and re-install.