forged piston for 400m
Thread Starter
|
Posting Guru
Joined: Feb 2013
Posts: 1,555
Likes: 1
forged piston for 400m
is there any one or pistons for another motor that will fit in a 400 that are forged, i am playing around with a 400 and want to hit it with some aftermarket parts and maybe some Nos
Posting Guru
Joined: Nov 2008
Posts: 1,937
Likes: 2
From: wyoming
call tim meyer or??
Look into some cleveland forged pistons and have to bush the rod ends on small end for different piston pins! not a big deal just a few extra bucks. 100 shot not to big but to be careful go forged.
few other way to do this but this is a good start.
few other way to do this but this is a good start.
Senior User
Joined: May 2012
Posts: 161
Likes: 0
These are definitely NOT going to be N2O friendly at ~11:1, but maybe you can contact the company and see if you can get some made for your application.
Last edited by OrangeBeast; Jan 31, 2014 at 10:03 PM. Reason: Corrected Chemical Formula
Thread Starter
|
Posting Guru
Joined: Feb 2013
Posts: 1,555
Likes: 1
so how do i contact these people, and what is the cost roughly that yours cost
Senior User
Joined: May 2012
Posts: 161
Likes: 0
Here is their website:
RaceTec & AutoTec Pistons specializes in custom pistons for Sprint Cars, Dirt Modified & Dirt
If you Google AutoTec pistons you will get lots of google hits and it looks like the company's pistons are sold retail. Unfortunately, I don't have a price on mine separately nor do I know if they have an off the shelf version for the 351M/400. I got mine in a stroker kit from Tim Meyer for a custom sized bore, but wanted to put the company name out there for you in case you could use it to find what you need.
RaceTec & AutoTec Pistons specializes in custom pistons for Sprint Cars, Dirt Modified & Dirt
If you Google AutoTec pistons you will get lots of google hits and it looks like the company's pistons are sold retail. Unfortunately, I don't have a price on mine separately nor do I know if they have an off the shelf version for the 351M/400. I got mine in a stroker kit from Tim Meyer for a custom sized bore, but wanted to put the company name out there for you in case you could use it to find what you need.
Thread
Thread Starter
Forum
Replies
Last Post
Kyle Wood
1973 - 1979 F-100 & Larger F-Series Trucks
5
Nov 10, 2016 01:30 PM
choppergeorge2003
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
5
Jan 22, 2014 07:04 PM
