5.4 issues

Reply Subscribe

Thread Tools

Search this Thread

Dec 11, 2013 | 07:34 PM

#16

CC250

Thread Starter

New User

Joined: Nov 2013

Posts: 15

Likes: 0

I will give it a try tomorrow morning, thanks

Dec 12, 2013 | 04:01 PM

#17

CC250

Thread Starter

New User

Joined: Nov 2013

Posts: 15

Likes: 0

I scanned my truck and my scanner does do pending scans and none came up. I did notice when I was scrolling through the scanner and it said 1 inc. 7 ready. Is that anything? I have not had a chance to look over my pcv valve yet hopefully by the weekend I will. Truck ran good today though.

Dec 27, 2013 | 02:25 PM

#18

CC250

Thread Starter

New User

Joined: Nov 2013

Posts: 15

Likes: 0

Hey guys I know it's been a few weeks but I did replace my pcv valve and the truck seemed to be running normal but now the cel is showing that cylinder 4 is misfiring. Also p0316 misfire 1000 revs.I just replaced that pack a month ago. Any ideas? I was hoping it was as simple as the pcv.

Last edited by CC250; Dec 27, 2013 at 02:26 PM. Reason: Had two remove ?