Original Floor Mat Source?
Elder User
Joined: May 2010
Posts: 957
Likes: 3
From: Valley Center, CA
I have to be honest...when it comes to the replacement parts for the slicks, I am anything but impressed-my floor
rubber mat is now only about two years old or so, and it's cracked...my gas nozzle rubber is already falling apart-it's
two years old, and the replacement mirrors already began rusting, and the passenger side one doesn't even angle in
enough to be useable.
rubber mat is now only about two years old or so, and it's cracked...my gas nozzle rubber is already falling apart-it's
two years old, and the replacement mirrors already began rusting, and the passenger side one doesn't even angle in
enough to be useable.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
1965/66 F100/250 2WD & 1966 F100 4WD Custom Cab floor mats were available in beige - black - blue - green - red. All except the black mat have black flecks.
3 M/T and A/T same mat, 4 speeds used a different mat.
As previously mentioned, floor mats were rolled up in a cardboard box. Over time, changes in temperature caused cracks to develop.
When it's unrolled, will either be thoroughly cracked, or be composed of myriad individual pieces of hard rubber.
3 M/T & A/T:
C5TZ-8113010-ATAB .. Floor Mat-Black
C5TZ-8113010-AUAB .. Floor Mat-Red w/Black Flecks
C5TZ-8113010-AUAC .. Floor Mat-Blue w/Black Flecks
C5TZ-8113010-AUAD .. Floor Mat-Green w/Black Flecks
C5TZ-8113010-AUAE .. Floor Mat-Beige w/Black Flecks
3 M/T and A/T same mat, 4 speeds used a different mat.
As previously mentioned, floor mats were rolled up in a cardboard box. Over time, changes in temperature caused cracks to develop.
When it's unrolled, will either be thoroughly cracked, or be composed of myriad individual pieces of hard rubber.
3 M/T & A/T:
C5TZ-8113010-ATAB .. Floor Mat-Black
C5TZ-8113010-AUAB .. Floor Mat-Red w/Black Flecks
C5TZ-8113010-AUAC .. Floor Mat-Blue w/Black Flecks
C5TZ-8113010-AUAD .. Floor Mat-Green w/Black Flecks
C5TZ-8113010-AUAE .. Floor Mat-Beige w/Black Flecks
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
FoMoCo offered accessory individual front & rear rubber floor mats for 1960/64 Galaxies in myriad different colors. Have either a black or white Ford crest on them.
Obsolete for many years, NOS originals were bringing mega bucks on ebay. In a bidding war, someone paid a grand for a set of black front mats.
But now, the mats are reproduced by Carpenter, front set is around 135 bucks. These will also fit 1961/79 trucks.
Obsolete for many years, NOS originals were bringing mega bucks on ebay. In a bidding war, someone paid a grand for a set of black front mats.
But now, the mats are reproduced by Carpenter, front set is around 135 bucks. These will also fit 1961/79 trucks.
Logistics Pro
Joined: Mar 2012
Posts: 4,388
Likes: 42
From: placer county usa?
I have to be honest...when it comes to the replacement parts for the slicks, I am anything but impressed-my floor
rubber mat is now only about two years old or so, and it's cracked...my gas nozzle rubber is already falling apart-it's
two years old, and the replacement mirrors already began rusting, and the passenger side one doesn't even angle in
enough to be useable.
rubber mat is now only about two years old or so, and it's cracked...my gas nozzle rubber is already falling apart-it's
two years old, and the replacement mirrors already began rusting, and the passenger side one doesn't even angle in
enough to be useable.
More Turbo
Joined: May 2012
Posts: 603
Likes: 3
From: San Antonio
I looked high and low for a mat for my 64 with a 3spd. Mine was in descent shape until the body shop removed it in pieces. The gear and lighting bolt logos were too cool. I want to get on the list for a repo.
I would be fine with a repo of the lighting gear/bolt logo and a cutter to cut a whole out a hole for the logo. This would give everyone the logos without the logo maker having to make all the variations.
I would be fine with a repo of the lighting gear/bolt logo and a cutter to cut a whole out a hole for the logo. This would give everyone the logos without the logo maker having to make all the variations.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Laughing Gas
Joined: Nov 2001
Posts: 968
Likes: 71
From: Cherryville,N.C.
Here is some samples of Ford trunk mat patterns I spoke of in an earlier reply on this thread!Maybe something could be made up with one of these?I don't know,just an idea!!!
Trunk Mat Vinyl Carpet Samples
Trunk Mat Vinyl Carpet Samples
Thread
Thread Starter
Forum
Replies
Last Post
Lug Nut
Ford Truck Parts for Sale
3
Jan 13, 2016 08:16 PM
emgee
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
22
Aug 14, 2015 09:36 PM
packrat56
1948 - 1956 F1, F100 & Larger F-Series Trucks
10
Feb 6, 2006 08:11 PM