radio bracket

Reply Subscribe

Thread Tools

Search this Thread

Nov 14, 2013 | 05:47 PM

#31

51PanelMan

Lead Driver

Joined: Dec 2004

Posts: 7,669

Likes: 13

From: San Jose, CA

The speaker bolts to the bracket which is attached through the radio control ***** through the dash.

Nov 14, 2013 | 10:09 PM

#32

tractormanbill

tractorman

Joined: Oct 2011

Posts: 709

Likes: 4

From: San Antonio, Texas

But what do the two ears bolt to on the sides?
Tractormanbill

Nov 14, 2013 | 10:14 PM

#33

51PanelMan

Lead Driver

Joined: Dec 2004

Posts: 7,669

Likes: 13

From: San Jose, CA

Yes, Bill, you appear to be correct. I forgot about those tabs. Looks like they're positioned to be attached to two of the bolts that attach the speaker trim to the dash.

Nov 15, 2013 | 06:15 AM

#34

tractormanbill

tractorman

Joined: Oct 2011

Posts: 709

Likes: 4

From: San Antonio, Texas

I'll measure them up and see what I can build.
Thanks
Tractormanbill

Nov 17, 2013 | 05:24 PM

#35

alamartina

Thread Starter

Junior User

Joined: Nov 2013

Posts: 67

Likes: 0

From: Meridian, ID

Ok, so I mounted the radio without the speaker bracket. Will have to put the speaker behind the kick panel.
Had to move the Heater cable because of the radio.
Now all I need are the condenser values to eliminate engine interference. Anyone have an idea where to find the info?
Also, if the speaker magnet contacts the metal body, will this create a problem?
If so, if I put an aluminum plate between the magnet and body, would this alleviate the problem?