How much power
Thread Starter
|
Senior User
Joined: Apr 2005
Posts: 204
Likes: 1
From: Gillette, wy
How much power
Well i finally got my 390 in my 73 ford f250 put together. I ran the cam in last night. It does sound healthy. What a difference between stock and now. It sure revs a lot quicker too. I was wondering if anyone on here has a desktop dyno and could tell me approximately how much power i have. Here are the specs:
.030 over bore
KB150 pistons
C8ae heads with stock size stainless valves and seats and ported and polished runners
Longtube fenderexit headers
Edelbrock performer rpm intake ported and polished
600 cfm holly carb
Duraspark ignition
Roller rockers
If you need any other info let me know
.030 over bore
KB150 pistons
C8ae heads with stock size stainless valves and seats and ported and polished runners
Longtube fenderexit headers
Edelbrock performer rpm intake ported and polished
600 cfm holly carb
Duraspark ignition
Roller rockers
If you need any other info let me know
Super Moderator
Joined: Apr 2004
Posts: 34,519
Likes: 2,826
What bumpstick?
I get 9.2 for CR.
I will put a WAG out there of 325-350 with mid 400s for torque, based on the numbers here. ymmv
https://www.ford-trucks.com/forums/1...-makin-hp.html
I get 9.2 for CR.
I will put a WAG out there of 325-350 with mid 400s for torque, based on the numbers here. ymmv
https://www.ford-trucks.com/forums/1...-makin-hp.html
Thread
Thread Starter
Forum
Replies
Last Post
piperig78
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
18
May 3, 2007 01:05 AM
brian0357
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
6
Jul 11, 2006 04:11 PM
austynn2001
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
3
Sep 9, 2005 06:02 PM
fordguy76
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
3
Nov 25, 2004 12:26 AM
fordboy1973
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
26
Feb 9, 2004 11:44 PM
