ICP Sensor
Thread Starter
|
Senior User
Joined: Apr 2012
Posts: 137
Likes: 0
From: Elberta, AL
ICP Sensor
ICP sensor going bad? No start with warn engine...let it sit for a couple of hours and she'll start right up. Took an ICP reading of +300psi at KOEO...should be 0 psi, right? Unplugged the ICP harness and she started right up. Plugged the harness back in and now get a reading of +9psi and she starts up every time.
Question is to replace the ICP sensor with an OEM or aftermarket part?
Question is to replace the ICP sensor with an OEM or aftermarket part?
Elder User
Joined: Sep 2012
Posts: 776
Likes: 3
From: Philly, PA USA
have you done a wiggle test on the connector too? VERY prone to having the harness/connector go bad too.... while running have a buddy sit in truck...sometimes you can hear a difference too and not need a buddy.
Either one of the parts mentioned above will work and are interchangeable... but I wouldn't steer out of Ford or International parts.
Either one of the parts mentioned above will work and are interchangeable... but I wouldn't steer out of Ford or International parts.
Thread
Thread Starter
Forum
Replies
Last Post
03superdoody
6.0L Power Stroke Diesel
15
Sep 8, 2009 08:40 AM
