2004 Excursion 6.0 4WD
Thread Starter
|
New User
Joined: Jul 2013
Posts: 1
Likes: 0
2004 Excursion 6.0 4WD
Hello everyone!
I have two questions I was hoping someone could help me with:
First, I just finished replacing the front ball joints (all four), axle u joints, axle outer and dust seals, and hub (yellow) seals, rebuilt the front calipers (seals, dust boots, guide pins, pin boots), new pads, new rotors, and finally, new shocks.
Does anyone know where I can find fastener torque values for all the stuff I have to remove?
Next up is the rear end over the coming weekend. Does anyone know how to remove the rear rotors?
I have two questions I was hoping someone could help me with:
First, I just finished replacing the front ball joints (all four), axle u joints, axle outer and dust seals, and hub (yellow) seals, rebuilt the front calipers (seals, dust boots, guide pins, pin boots), new pads, new rotors, and finally, new shocks.
Does anyone know where I can find fastener torque values for all the stuff I have to remove?
Next up is the rear end over the coming weekend. Does anyone know how to remove the rear rotors?
Thread
Thread Starter
Forum
Replies
Last Post
gd98tj
Escape & Escape Hybrid
1
Jul 16, 2004 11:24 AM
