Engine Block Ground Cable
Thread Starter
|
New User
Joined: May 2013
Posts: 14
Likes: 0
Engine Block Ground Cable
So I just put a new starter solenoid in my 1987 F250 6.9L. It went fine except for finishing and realizing I hadn't connected the engine block ground cable from where ever I took it off from while getting everything off the starter solenoid. Now I have no idea where that's supposed to connect! Help anyone? Sorry it's such a dumb question. I just don't feel like shocking myself or starting a fire.
I did start the truck before realizing I didn't have it connected and it was reading off the voltage meter. Hope I didn't damage anything.
Here are two pictures. The first is me holding the cable that I don't know where to put. The second picture shows it on the right side along with the rest of the battery setup.
Thanks for any help!
I did start the truck before realizing I didn't have it connected and it was reading off the voltage meter. Hope I didn't damage anything.
Here are two pictures. The first is me holding the cable that I don't know where to put. The second picture shows it on the right side along with the rest of the battery setup.
Thanks for any help!
Thread
Thread Starter
Forum
Replies
Last Post
abe
1948 - 1956 F1, F100 & Larger F-Series Trucks
8
Nov 9, 2017 12:35 PM
Derik Landers
1987 - 1996 F150 & Larger F-Series Trucks
1
Oct 16, 2017 06:30 PM
