GALVANIZED COWLING PAINT
More Turbo
Joined: Mar 2012
Posts: 515
Likes: 8
Well, I don't really think so. You COULD spray the poly, but poly won't seal the surface because it is porous. Ideally, I think what you're looking for is to lay epoxy primer down first, then do the poly that you got and then top coat it. Epoxy will seal the metal.
Tuned
Joined: Nov 2010
Posts: 426
Likes: 1
From: Caledon ON
Poly is not the same as epoxy. The guy sold you the wrong product. You need to lay down an epoxy primer over the areas of bare metal, let dry, give a light scuff then you can either lay down a poly surfacer ( high build) over the whole truck to fill any imperfections then block smooth and then spray primer sealer over the high build, block smooth then top coat or you can skip the poly surfacer and just go directly to sealer over the epoxy if you think your body work is good enough. Then top coat.
Thread Starter
|
Lead Driver
Joined: Mar 2008
Posts: 7,182
Likes: 380
From: Near Los Angeles
Dagnabit!! I'm in California. Summit won't sell epoxy primer to me. My paint shop will sell it for $100 per quart!!
I believe I'll have to spray the self etching and then on top of that the high build poly primer, and then the top coat.
I believe I'll have to spray the self etching and then on top of that the high build poly primer, and then the top coat.
Thread
Thread Starter
Forum
Replies
Last Post
