First spin around the yard-Video
#2
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 263,271
Received 4,174 Likes
on
2,680 Posts
#6
#7
Trending Topics
#8
#9
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 263,271
Received 4,174 Likes
on
2,680 Posts
#11
Thanks guys.
Joe- the little chip was unintentional but I may be to blame for the second.
Jimmy- it got hot today. Gota get a tan before I hit the beach (water park) so sorry for the bright leg glare.
Ross- I tried a little body work a few years back. Need to fix that crap
Ben- O he was all about it. Every time I see your truck I know what color I'm painting mine (beautiful choice you made) then go back to the other colors (John Deere blitz black, White, or *Original (dark green).
Joe- the little chip was unintentional but I may be to blame for the second.
Jimmy- it got hot today. Gota get a tan before I hit the beach (water park) so sorry for the bright leg glare.
Ross- I tried a little body work a few years back. Need to fix that crap
Ben- O he was all about it. Every time I see your truck I know what color I'm painting mine (beautiful choice you made) then go back to the other colors (John Deere blitz black, White, or *Original (dark green).
#13
#14
Thanks Topmoo.
Jack-Yea, I have a bad alignment problem. I saw as I drove it that it settled down in the front an inch or two. Didn't expect that because that caused my camber to get out of wack. I tightened all the upper A arm bolts (which were not that tight). I also needed to adjust the tie rods out, then in, then out. This is all exciting though. I like the idea of tape.
Jack-Yea, I have a bad alignment problem. I saw as I drove it that it settled down in the front an inch or two. Didn't expect that because that caused my camber to get out of wack. I tightened all the upper A arm bolts (which were not that tight). I also needed to adjust the tie rods out, then in, then out. This is all exciting though. I like the idea of tape.