84 ford yfa wiring
Thread Starter
|
New User
Joined: Jun 2003
Posts: 2
Likes: 0
84 ford yfa wiring
I have an 84 ford 4.9L with a carter YFA Carb. I am looking for wiring information on the choke and the carburator stepper motor. I need the wire locations on the plug at the stepper motor connector. it is a 4 wire square connector. Two of my wires broke at the connector itself. As for the choke, I have a wire that was brittle and no indication of what it connects to in my wiring diagram. Any help would be appreciated.
Posting Guru
Joined: Mar 2001
Posts: 1,494
Likes: 0
84 ford yfa wiring
I'm from the older vintage carb, but I might be able to help a little. You'll need a voltmeter. The carb choke lead should be 6V and only live when the motor is on. The stepper/kicker solenoid lead should have 12V and live when the key is in the accessory (sp?) position. As far as the feedback...I'm useless.
Thread
Thread Starter
Forum
Replies
Last Post
itsnotanova
1999 - 2003 7.3L Power Stroke Diesel
4
Dec 30, 2016 12:20 PM
BBslider001
1994.5 - 1997 7.3L Power Stroke Diesel
8
Oct 23, 2016 09:40 PM
Hydrocarbon302
Engine Swaps
0
Mar 27, 2016 10:40 AM
Smalltownboy
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
8
Apr 14, 2015 11:56 PM
