Starting issues
Thread Starter
|
Tuned
Joined: Apr 2006
Posts: 331
Likes: 4
From: grorgetown,in
Starting issues
05 6.0 208,000 miles. You start it and you can drive anywhere. You shut it off and it wont fire back until next day. Last night i started it cold and let it run maybe a minute, shut it off and tried to restart. Was a no go. When it does start icp is around 700 and duty cycles 26. When it doesnt start icp is 380 and.duty goes to 85%. Tried ipr for the heck of it. No luck. Dont understand how when.it starts you can drive anywhere until you shut it off. Guess ill start with stc. Unless somebody has better idea thanks
Hotshot
Joined: Apr 2010
Posts: 19,061
Likes: 238
From: Saratoga Springs,UT
you have a HPO Leak
Replace STC Fitting and Standpipes and Dummey Plugs are the Most common for 05+ to go out
Hot Oil Viscosity is thinner so you cant build the Required amount of press to start again once oil is Hot
Then it cools and has a Thicker Viscosity so it can build the required Press to start
Replace STC Fitting and Standpipes and Dummey Plugs are the Most common for 05+ to go out
Hot Oil Viscosity is thinner so you cant build the Required amount of press to start again once oil is Hot
Then it cools and has a Thicker Viscosity so it can build the required Press to start
Thread
Thread Starter
Forum
Replies
Last Post
