February BS thread!!
Thread Starter
|
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,851
Likes: 9
From: Suppertown, MN
Good morning Eric!
Good morning Chris!
Good morning Jay!
Thread Starter
|
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,851
Likes: 9
From: Suppertown, MN
Yeah I have enough work in the shop to keep me busy for today and probably tomorrow so that is good.
Fleet Owner
Joined: Mar 2003
Posts: 24,724
Likes: 74
From: Blue Hill Township
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Thread Starter
|
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,851
Likes: 9
From: Suppertown, MN
Never messed with them myself to speak of.
Good morning Jake! Yeah there is a 2hr delay here at the Univ as well. I think I can only remember a couple times when the Univ has closed due to weather.
Postmaster
Joined: Jul 2009
Posts: 3,526
Likes: 0
From: Lunchtown
That's what is on my snowblower. I don't know a ton, but I've cleaned a couple of them.
I bought a gallon of some carb cleaning solvent from AutoZone. All I do to clean them up is take the bowl off, take out the needle and seat and any other non-metal parts, then drop it in the can for 24 hours. Pull it out, blow it out with an air compressor and put together again with new bowl gasket, needle and seat. Pretty simple process. It's worked great.
There are some PDFs on the web that I found that talk about which screw adjusts what setting.
I bought a gallon of some carb cleaning solvent from AutoZone. All I do to clean them up is take the bowl off, take out the needle and seat and any other non-metal parts, then drop it in the can for 24 hours. Pull it out, blow it out with an air compressor and put together again with new bowl gasket, needle and seat. Pretty simple process. It's worked great.
There are some PDFs on the web that I found that talk about which screw adjusts what setting.
Posting Guru
Joined: Jan 2010
Posts: 2,389
Likes: 0
From: Crookston, MN
Yeah, I'd believe it Troy. Basically we close whenever they shut down the plows on Highway 2 heading into Grand Forks. I pretty much figured they'd shut it down last night. As it was snowing pretty good and blowing even worse.
I realized last night, when I was headed to the grocery store, that after church yesterday morning I left my lights on.... Lovely. I have some studying to do yet this morning before I have to go to school, and then my roommate is going to try and jump me.
I realized last night, when I was headed to the grocery store, that after church yesterday morning I left my lights on.... Lovely. I have some studying to do yet this morning before I have to go to school, and then my roommate is going to try and jump me.
Thread Starter
|
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,851
Likes: 9
From: Suppertown, MN
Good morning Lee! I have not heard a final amount but I would say at a least 12" or more of snow.
Postmaster
Joined: Jun 2011
Posts: 3,293
Likes: 0
From: On the saddle
Yeah, I'd believe it Troy. Basically we close whenever they shut down the plows on Highway 2 heading into Grand Forks. I pretty much figured they'd shut it down last night. As it was snowing pretty good and blowing even worse.
I realized last night, when I was headed to the grocery store, that after church yesterday morning I left my lights on.... Lovely. I have some studying to do yet this morning before I have to go to school, and then my roommate is going to try and jump me.
I realized last night, when I was headed to the grocery store, that after church yesterday morning I left my lights on.... Lovely. I have some studying to do yet this morning before I have to go to school, and then my roommate is going to try and jump me.