400 engine stuff

Reply Subscribe

Thread Tools

Search this Thread

Dec 18, 2012 | 06:28 PM

1978-Punisher

Thread Starter

New User

Joined: Dec 2012

Posts: 2

Likes: 0

From: Great Falls MT

400 engine stuff

OK so this my first post been here a lot but not as a member. I have 1978 F250 w/400 well I am getting a new 400 installed next week with a double roller timing chain and a Cleveland cam. My question is what would you recommend doing wise before it goes in. Keep in mind this is my dd.

Dec 18, 2012 | 07:42 PM

rancheronut

Junior User

Joined: Jul 2008

Posts: 99

Likes: 0

From: montana of course!

wellcome from other person that call greatfalls home!

Dec 18, 2012 | 09:16 PM

1978-Punisher

Thread Starter

New User

Joined: Dec 2012

Posts: 2

Likes: 0

From: Great Falls MT

Thanks there is another guy on here somewhere he is also Air force he has a white dent with grey tree painted all over it.

Dec 18, 2012 | 09:48 PM

vic_v8

Elder User

Joined: Apr 2008

Posts: 542

Likes: 0

From: Dixon, IL

I'm guessing the timing will be straight up? and if you can afford a little port work, that's always good. same with an aftermarket intake.

Dec 19, 2012 | 11:30 PM

johnson2007

Senior User

Joined: Jun 2008

Posts: 264

Likes: 0

From: Bozeman, MT

I'm guessing you got the engine from automotive machine? I'm basing that off of the Cleveland cam description... That's what they told me too, but couldn't give me any specs or anything on the cam.

Dec 20, 2012 | 12:01 AM

85e150

Super Moderator

Joined: Apr 2004

Posts: 34,466

Likes: 2,798

Almost any cam is better than stock.

Are they putting any compression in it? There are pistons available so you don't have to settle for 7ish compression.