building a pulling truck 460

Reply Subscribe

Thread Tools

Search this Thread

May 25, 2003 | 01:16 PM

rrbird57

Thread Starter

New User

Joined: May 2003

Posts: 13

Likes: 0

building a pulling truck 460

Building a pulling truck. need suggestions on power mods for a 87 460 in a f-250. Motor was rebuilt about 2yrs ago. has a rv cam. I have a set of harlem sharp roller rockers on the shelf not installed yet. motor is mostly stock. I removed most of the emission equipment . still has the egr valve under the carb though.

May 26, 2003 | 07:59 AM

georgedavila

Postmaster

Joined: Aug 2001

Posts: 2,882

Likes: 0

From: Nevada

building a pulling truck 460

If rebuilt stock other than the RV cam, you have a low compression engine with the timing retarted 4-degrees. Not the best candidate for bolt-on speed equipment.