edelbrock compatability headache
Thread Starter
|
Senior User
Joined: Apr 2012
Posts: 131
Likes: 0
edelbrock compatability headache
ok so i have called compcams and edelbrock and they wont give me a clear answer to my question. so im going to ask you guys. i am ordering Edelbrock Performer RPM Cylinder Heads 60058, they are bare, i have High Energy™, 268H: Cam & Kit for my my motor. i want to use this rocker assembly COMP Cams Ford FE Shaft Rockers 1046-KIT. my question is will this bolt to these heads and work with my cam. will stock rocker stands work? are my springs to small or big? please let me know.
Logistics Pro
Joined: Jan 2011
Posts: 4,762
Likes: 54
From: Antelope Valley ,CA
Made from 7000 Series aluminum, these 1.200 in. wide rocker bodies from COMP Cams are recommended for engines using roller camshafts. These shaft systems are equipped with special end stands for valvetrain stability at high rpm, and therefore virtually eliminate shaft failure. The systems also feature top and bottom oil holes for added rocker lubrication.
pretty sure they come with their own stands
pretty sure they come with their own stands
Thread
Thread Starter
Forum
Replies
Last Post
ford1967
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
7
Oct 12, 2017 01:14 PM
ColodadoFordBoys
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
9
Jan 20, 2009 08:46 AM
mxer289
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
1
Sep 27, 2006 07:37 PM
Randyb12
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
12
Sep 14, 2003 10:01 PM
