two different heads
Thread Starter
|
Senior User
Joined: Oct 2008
Posts: 264
Likes: 0
From: Rockwall TX
two different heads
as i was doing my intake gasket on my 59 f100 i checked my head casting numbers and found i have 2 different heads. my driver side is C1TE and passenger side is 5752-113. i was under the impression that ther original for 59 trucks were 5750-471. is this incorrect. also if any one has an extra 5752-113 there wanting to sell please let me know
Tuned
Joined: Nov 2003
Posts: 491
Likes: 6
From: Eastern Washington
My 59 292 originally came with ECZ-G heads which have the 1.92 intake valves and flow pretty good. It had a 113 head on one side and utilizes the same 1.92 intake valve size which was a replacement when talking with the original owner. C1TE head has a smaller valve size I think around 1.64. I would recommend finding a nother 113 or G head to match the other. John Mummert site has info regarding valve size for different heads etc.
Thread
Thread Starter
Forum
Replies
Last Post
anotherF150
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
3
Oct 6, 2003 11:06 PM
79trucksforever
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
4
Feb 27, 2001 09:00 PM
