When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've had a problem with the rear end leaking after pulling the truck hard so I checked the vent tube and I found that the clip that holds it to the frame pinched the hose closed. It looks like when the clip was installed it should have been placed at the end of the hose so the plastic vent on the end would stop it from collapsing the hose, that's the way it is now. Just something to check
probally installed wrong, the little clip should be pryed up slightly. but did it fix your problem?
I'll find out when we head form Congress AZ to Casa Grande on the 25th, I'm guessing it will still leak some until I replace the gasket after being pressurized and damaging the silicon gasket but it may stop altogether time will tell.
Well we pulled the trailer 130 miles and put about 150 miles on empty and it stopped leaking completely so it's been my problem all along but it's fixed now