Dome Light help - not working
Thread Starter
|
New User
Joined: Dec 2011
Posts: 10
Likes: 0
Dome Light help - not working
I have a 01 F250 Crew Cab 7.3 Diesel XLT.
The dome lights nor the cargo lights work. I have checked the bulbs and fuse. Does anyone know what causes this? I am thinking that I have a bad ground somewhere?
I read 0 potential between the two post on the dome light bulb(with the bulb removed). I also read 12 volts between either post and ground?
any help is appreciated!
The dome lights nor the cargo lights work. I have checked the bulbs and fuse. Does anyone know what causes this? I am thinking that I have a bad ground somewhere?
I read 0 potential between the two post on the dome light bulb(with the bulb removed). I also read 12 volts between either post and ground?
any help is appreciated!
You'll shoot your eye out
Joined: May 2011
Posts: 3,281
Likes: 4
From: San Antonio, TX
I did a little digging and found this. Maybe it will help you.
https://www.ford-trucks.com/forums/1...omponents.html
https://www.ford-trucks.com/forums/1...omponents.html
Thread Starter
|
New User
Joined: Dec 2011
Posts: 10
Likes: 0
Thanks. It did help alot. I searched and searched and couldn't find that.
anyway, I am fairly certain that i have a bad GEM module. But I can't find it. Where is the GEM??
I'll post on the other thread and see if he can tell me.
anyway, I am fairly certain that i have a bad GEM module. But I can't find it. Where is the GEM??
I'll post on the other thread and see if he can tell me.
Lead Driver
Joined: Nov 2008
Posts: 8,450
Likes: 70
From: South Jersey
its under the passenger side dash, other then that i cant tell you exactly where it is under there. And Fords GEM suck!! All i do is read post all over Google with the 99-02 crew cabs having tons of problems with these junks
Thread
Thread Starter
Forum
Replies
Last Post
dono
1983 - 2012 Ranger & B-Series
3
Jul 18, 2001 03:10 PM
