Integrated Brake Controller
Thread Starter
|
New User
Joined: Oct 2012
Posts: 4
Likes: 0
Integrated Brake Controller
2006 F250 - no power to the truck plug-ins, OEM bumper plug or bed plug-in to operate trailer brakes. Marker lights, brake lights, and flashers work (individual and 4-way), no trailer brakes....trailer brakes work when the controller lever is operated. Any ideas out there? Had the truck checked to see if computer and controller are communicating...all is well. Just no power from the brake pedal to the connectors. Appreciate any help.
Thread Starter
|
New User
Joined: Oct 2012
Posts: 4
Likes: 0
Appreciate the suggestion. Have read other posts (not the same issue) that the brake pin could be squeezed together and not making contact with the plug side and also corrosion could be an issue. Not so sure on that because neither plug mounted on the truck works. Will check both in the A.M. though.
Thread Starter
|
New User
Joined: Oct 2012
Posts: 4
Likes: 0
Solve the problem! Installed a Tekonsha P-3 brake controller. Pretty easy install with the wire harness and connector that's made to match the Ford harness and connector. Thanks e-trailer.com for all the assistance!
Thread
Thread Starter
Forum
Replies
Last Post
1duallyman
Electrical Systems/Wiring
3
Jun 9, 2011 05:49 AM
