soft brake pedal
Thread Starter
|
New User
Joined: Sep 2012
Posts: 6
Likes: 0
soft brake pedal
Bought a 95 f350 the guy said he put on new brakes but they are ultra soft. I have not checked the lines for air yet if I do that and they still are soft where should I check next? Also I have been told it might be the rads valve don't recall hearing of that before your thoughts.
Post Fiend
Joined: Dec 2009
Posts: 15,505
Likes: 18
From: Livoina,La
Start with bleed the braces and check rear brakes for proper adjustment.
When bleeding start with RR, LR, RABS, RF, LF
Bleed each one 3 times before moving to the next wheel. Check fluid level after each wheel.
When bleeding start with RR, LR, RABS, RF, LF
Bleed each one 3 times before moving to the next wheel. Check fluid level after each wheel.
Fleet Owner
Joined: Aug 2004
Posts: 20,419
Likes: 197
From: AZ
I'm a big fan of gravity bleeding. I just did my front brakes and just opened the bleed valve a little and tap on the caliper to free up the air bubbles. I used to have my wife pump the brake pedal, then used a mittyvac but now perfer gravity bleeding.
Thread
Thread Starter
Forum
Replies
Last Post
Broncoman1989
1948 - 1956 F1, F100 & Larger F-Series Trucks
5
May 17, 2011 08:34 PM
bodabdan
1994.5 - 1997 7.3L Power Stroke Diesel
22
Nov 5, 2006 09:54 AM
