Engine won't start
Logistics Pro
Joined: Nov 2006
Posts: 3,679
Likes: 370
From: Fallon,NV & Bainbridge OH
Good job getting it going. As far as timing it is better to set for total timing than for initial.
Walnut Creek being near sea level I would suggest something like 32 degrees total to start with then play with it from there.
Walnut Creek being near sea level I would suggest something like 32 degrees total to start with then play with it from there.
Fleet Mechanic
Joined: Aug 2010
Posts: 1,994
Likes: 3
From: Morgan Hill, CA
Excellent news Chris!! Persistence pays off once again!
For timing....you can try a vacuum gauge approach. Here's a link:
Classic Inlines - Tuning with a Vacuum Gage
Dan
For timing....you can try a vacuum gauge approach. Here's a link:
Classic Inlines - Tuning with a Vacuum Gage
Dan
Thread
Thread Starter
Forum
Replies
Last Post
sarah.amber
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
13
Mar 23, 2023 09:33 PM
pyrotvfun
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
7
Oct 8, 2015 02:13 PM
DigitalCrossbow
1967 - 1972 F-100 & Larger F-Series Trucks
15
Nov 26, 2014 01:45 PM
dylansf23
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
30
Nov 30, 2013 07:38 PM
