Ford F250
Thread Starter
|
New User
Joined: Aug 2012
Posts: 6
Likes: 0
Ford F250
2000 Ford F250 V10, replaced upstream O2 sensors, PCV valve, spark plugs, IAC, hoses and now the EGR which changed things. The truck runs bad and the throttle body gets hot. I'm afraid to drive as it seems it will break down. Any ideas?
Senior User
Joined: May 2010
Posts: 471
Likes: 1
From: Pocatello, Idaho
Hello and Welcome to FTE!
What was the truck doing before you replaced all those things? Was all of them replaced at the same time? Or was it done in stages, trying to fix the problam? If you can give a little more info on what is going on we might be able to give some more idea's.
What was the truck doing before you replaced all those things? Was all of them replaced at the same time? Or was it done in stages, trying to fix the problam? If you can give a little more info on what is going on we might be able to give some more idea's.
Thread Starter
|
New User
Joined: Aug 2012
Posts: 6
Likes: 0
The truck was running fine, just seems to idle high, just bought it and wanted to replace things as had no idea what previous owner had done. Vaccum at 18pds and steady. If I plug the EGR it runs great again?
Thread
Thread Starter
Forum
Replies
Last Post
