Cam Question
Thread Starter
|
Tuned
Joined: Dec 2011
Posts: 408
Likes: 2
From: South Carolina
Cam Question
Can anyone tell me about this CAM? I really don't know what it will offer over stock.
Here's a brief summary of where I am. I disassembled my engine and dropped it off at a machine shop. The machinist ordered new pistons, lifters, cam, etc for me.
I don't have the parts with me right now but I recall the machinist saying he was ordering pistons to get around 10:1 compression. I know the lifters are flat tappet hydraulic. I have stock rockers in there now but want to install Comp Cams High Energy Steel Rocker Arms. The pushrods are stock length but Comp Cams as well.
I got this cam but I'm wondering what this will add for performance.
Here's a brief summary of where I am. I disassembled my engine and dropped it off at a machine shop. The machinist ordered new pistons, lifters, cam, etc for me.
I don't have the parts with me right now but I recall the machinist saying he was ordering pistons to get around 10:1 compression. I know the lifters are flat tappet hydraulic. I have stock rockers in there now but want to install Comp Cams High Energy Steel Rocker Arms. The pushrods are stock length but Comp Cams as well.
I got this cam but I'm wondering what this will add for performance.
Thread
Thread Starter
Forum
Replies
Last Post
BearFootCustom
1987 - 1996 F150 & Larger F-Series Trucks
6
Aug 10, 2012 03:21 PM
saleen065
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
7
Jul 23, 2008 09:30 AM
F-150Guy
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
4
May 21, 2005 07:37 PM
ScottJM
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
9
Feb 16, 2005 11:52 PM
