any tips/advice?
Posting Guru
Joined: Aug 2007
Posts: 1,858
Likes: 6
From: laporte in
Buddies, beer, patience, pb blaster, hand, and power tools! In all reality you want a buddy there to help. I believe these ball joints are pressed in, so you'll need a ball joint press. A torch is the fastest and easiest way to remove old u joints IMO
Posting Guru
Joined: Sep 2011
Posts: 1,076
Likes: 0
From: Mt. Holly Springs, PA
For the u-joints... after the PB Blaster treatment, I use a C-lamp with two sockets, 1 big enough to press a cup into, and 1 just smaller than a cup for a press. Usually use one scocket to git-er started moving, then put the second one in.
Cant help on the ball joints, good luck
Cant help on the ball joints, good luck
Thread
Thread Starter
Forum
Replies
Last Post
MontanaboyDesigns
1973 - 1979 F-100 & Larger F-Series Trucks
3
Oct 26, 2018 09:52 AM
crandallf150
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Aug 6, 2016 11:32 AM
