Tow switch inop

Reply Subscribe

Thread Tools

Search this Thread

Apr 25, 2012 | 06:15 AM

freakville03

Thread Starter

New User

Joined: Aug 2011

Posts: 24

Likes: 0

From: Florida

Tow switch inop

The last time I hooked up my Travel Trailer and went to leave I pushed in my Tow button and it did not work. I was wondering if anyone has any idea what could cause this to happen? I know that it can be the switch it self, but what are the other options besides fuses. I have checked all fuses and they are good.

Is it ok to tow something with the tow switch not engaged? Trailer weighs 9200 lbs.

Apr 25, 2012 | 08:48 AM

69cj

Hotshot

Joined: Jul 2005

Posts: 13,834

Likes: 26

From: Middle Tn.

Could also be a broken wire inside the steering column.
Yes you can tow that way. If you need a lower gear you also have the column shift.

Apr 25, 2012 | 08:52 AM

Roasted7

Elder User

Joined: Oct 2010

Posts: 552

Likes: 1

Most likely a wire inside the column. Very common.

Apr 25, 2012 | 09:01 AM

freakville03

Thread Starter

New User

Joined: Aug 2011

Posts: 24

Likes: 0

From: Florida

69cj and Roasted7, I will check the steering column for a broken wire. If there is not a broken wire can you point to where i might start at after that.

Apr 25, 2012 | 09:09 AM

Mark Kovalsky

Frmr Ford Trans Engr

Joined: Aug 1999

Posts: 24,739

Likes: 2,669

From: SE Florida

It's always a broken wire where the wires enter the shift handle inside the steering column. You don't need to know where to look if that's not the problem because it ALWAYS is the problem.