No Spark
Thread Starter
|
Freshman User
Joined: Nov 2010
Posts: 26
Likes: 0
From: Enumclaw
No Spark
390 in a 75 f-100. Ignition module tested and good. Swapped out the coil and no difference. New ignition switch. Getting fuel but no spark. No clue as to what to try next.
Super Moderator
Joined: Apr 2004
Posts: 34,475
Likes: 2,800
Is there juice to the module?
If you start with no juice at the plug, you have to track back till you find electricity. Then you've got your problem point usually. Don't skip components and check wires and grounds along the way.
If you start with no juice at the plug, you have to track back till you find electricity. Then you've got your problem point usually. Don't skip components and check wires and grounds along the way.
Thread Starter
|
Freshman User
Joined: Nov 2010
Posts: 26
Likes: 0
From: Enumclaw
I dont see where power comes into module by looking at schematic. Is it the lead coming off the I post on solenoid? Which wire going into module do I check? My module is the one with the blue bracket at wires if that helps.
Thread
Thread Starter
Forum
Replies
Last Post
Bruce in SC
1973 - 1979 F-100 & Larger F-Series Trucks
14
Apr 26, 2026 06:53 PM
1984Ford300six
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
28
Aug 31, 2014 09:44 AM
