I need to drop the headliner and fix the washer hose. Is there a easy way to do it?
I hate interior trim work...I would rather put a motor in it than pull down this headliner

 

I had to pull mine down to how it recoverd. I just removed the console on the roof and used a medium panel tool to pop out the little gromits, pulled the moulding away and with a little help from my buddys pried the plactics away enough to use the panel tool and we drop the headliner right out. Its a pain in the azz but I had to recover it.
But to remove it to fix the rear washer hose, I doubt if Id mess with it.

 

Yea, If you are just repairing the rear washer fluid hose, you shouldn't have to take down the whole headliner. Just remove the trim above the rear door and you can pull it down enough to access the hose. There is a hose splice there that blew apart on mine when it was plugged in the rear squirter... A small safety pin unclogged mine then I just had to push the splice back together...

-Thor