1985 E-350 XLT, Hitch Question
Thread Starter
|
New User
Joined: Mar 2011
Posts: 18
Likes: 0
1985 E-350 XLT, Hitch Question
Okay. Got the hitch mounted up, and tight. Now, looking for an extender since the hitch will barely place the ball outside of the bumper. Did some reading and here and there, they talk about how an extender will reduce my towing/tongue weight immensely.
So, I need to get at least 6 - 8 inches further back. Any ideas? I have a "Curt" Class IV hitch, 2".
Was thinking of a solid tube cut and holed to specs, around 4 inches, with a receiver tip welded on the end.
Don't want to lose to much weight capability, but want to get it done right.
Thanks for any advice.
~~~~~~~~~~~~~~
Think this would solve my issue: http://www.etrailer.com/Ball-Mounts/Curt/D900.html
So, I need to get at least 6 - 8 inches further back. Any ideas? I have a "Curt" Class IV hitch, 2".
Was thinking of a solid tube cut and holed to specs, around 4 inches, with a receiver tip welded on the end.
Don't want to lose to much weight capability, but want to get it done right.
Thanks for any advice.
~~~~~~~~~~~~~~
Think this would solve my issue: http://www.etrailer.com/Ball-Mounts/Curt/D900.html
Thread
Thread Starter
Forum
Replies
Last Post
Skandocious
1987 - 1996 F150 & Larger F-Series Trucks
69
Oct 26, 2007 11:22 AM
