starting issues

Reply Subscribe

Thread Tools

Search this Thread

Feb 12, 2012 | 05:00 PM

IBleedOvalBlue

Thread Starter

Junior User

Joined: Jun 2011

Posts: 79

Likes: 0

From: Texas

starting issues

ok,went out to my truck and tried to start it.....nothing,no turn over nothing. so i checked my fuses all good,crawled under truck,solenoid was loose,so i took my starter off,tightened the solenoid down,tested the starter..all checked out.
but it still wont crank,batteries are fully charged.
any suggestions?
i used jumpercables from my truck batterys and it turned over just fine

Feb 12, 2012 | 05:10 PM

01PS

Elder User

Joined: Jun 2007

Posts: 705

Likes: 1

From: Sandia Park, NM

Check grounds and cables.

Feb 12, 2012 | 05:29 PM

IBleedOvalBlue

Thread Starter

Junior User

Joined: Jun 2011

Posts: 79

Likes: 0

From: Texas

yeah starting to think my cables are bad,wont start with it installed,but starter will turn over when current is directly applied

Feb 12, 2012 | 05:48 PM

carltonwebb

Cargo Master

Joined: Oct 2010

Posts: 2,089

Likes: 16

Did u wiggle the shifter or try it in nuetral if its automatic?

Feb 12, 2012 | 06:08 PM

IBleedOvalBlue

Thread Starter

Junior User

Joined: Jun 2011

Posts: 79

Likes: 0

From: Texas

fixt....after double checking fuses,the 30amp starter fuse had a hair line crack in it,put in a new one started right up,thanks to those who took the time